Corrosion resistance
Aluminum profiles have a density of only 2.7g/cm3, about one-third that of steel, copper, or brass (7.83g/ cm3 and 8.93g/ cm3, respectively). Aluminum exhibits excellent corrosion resistance in most environmental conditions, including air, water (or brine), petrochemical, and many chemical systems.
Electrical conductivity
Aluminum profiles are often chosen because of their excellent electrical conductivity. The electrical conductivity of aluminum is nearly half that of copper, weight equal.
Thermal conductivity rate
The thermal conductivity of aluminium alloys is about 50-60% of that of copper, which is good for heat exchangers, evaporators, heating appliances, cooking utensils, as well as cylinder heads and radiators for cars.
The ferromagnetic
Aluminum profiles are non-ferromagnetic, an important characteristic for the electrical and electronic industries. Aluminum profiles are non-flammable, which is important for applications involving handling or contact with flammable and explosive materials.
machinability
The machinability of aluminum profiles is excellent. The machining characteristics of various deformed and cast aluminum alloys, as well as the various states in which these alloys are produced, vary considerably, requiring special machine tools or techniques.
formability
Specific tensile strength, yield strength, ductility, and corresponding rate of work hardening govern the variation of allowable deformation.
Recycling sex
Aluminum is highly recyclable and the properties of recycled aluminum are almost indistinguishable from those of primary aluminum.
| Temper | T3-T8 |
| Grade | 1000series：1050/1060/1070/1080/1100/1350 |
| 2000series：2011/2014/2017/2024 | |
| 3000series：3002/3003/3104/3204/3030 | |
| 5000series：5005/5025/5052/5040/5054/5056/5083/5152 | |
| 6000series：6101/6003/6061/6063/6020/6201/6262/6082 | |
| 7000series：7003/7005/7050/7075 | |
| 8000series：8011 | |
| Thickness | 0.4-20mm or customize |
| Width | Customize |
| Length | 1m,2m,3m or customize length |
| Service | Perforated, Cutting special size, Doing flatness, Surface treatment,etc |
| Executive Standard | GB/DIN/ANSI/BS/JIS/ASTM/BS |
| Certificate | SGS/BV/MTC/IOS/CE |
| Delivery time | 7-15 days after deposit |
| Packaging Details | Protection film and hot shrink plastic film / EPE foam packing / brown paper packing / wooden packing / Metal pallet or depend onclients special requirement. |
| Product | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | V | Ti | Other | |
| Single | Total | |||||||||||
| 6061 | 0.4-0.8 | 0.7 | 0.2 | 0.15 | 0.8-1.2 | 0.04-0.35 | / | 0.25 | / | 0.15 | 0.05 | 0.15 |
| 6063 | 0.2-0.6 | 0.35 | 0.1 | 0.15 | 0.6-0.9 | 0.05 | / | 0.15 | / | 0.1 | 0.05 | 0.15 |
| 6082 | 0.7-1.3 | 0.5 | 0.1 | 0.4-1.0 | 0.6-1.2 | 0.25 | 0.1 | 0.1 | / | 0.2 | 0.05 | 0.15 |
Corrosion resistance
Aluminum profiles have a density of only 2.7g/cm3, about one-third that of steel, copper, or brass (7.83g/ cm3 and 8.93g/ cm3, respectively). Aluminum exhibits excellent corrosion resistance in most environmental conditions, including air, water (or brine), petrochemical, and many chemical systems.
Electrical conductivity
Aluminum profiles are often chosen because of their excellent electrical conductivity. The electrical conductivity of aluminum is nearly half that of copper, weight equal.
Thermal conductivity rate
The thermal conductivity of aluminium alloys is about 50-60% of that of copper, which is good for heat exchangers, evaporators, heating appliances, cooking utensils, as well as cylinder heads and radiators for cars.
The ferromagnetic
Aluminum profiles are non-ferromagnetic, an important characteristic for the electrical and electronic industries. Aluminum profiles are non-flammable, which is important for applications involving handling or contact with flammable and explosive materials.
machinability
The machinability of aluminum profiles is excellent. The machining characteristics of various deformed and cast aluminum alloys, as well as the various states in which these alloys are produced, vary considerably, requiring special machine tools or techniques.
formability
Specific tensile strength, yield strength, ductility, and corresponding rate of work hardening govern the variation of allowable deformation.
Recycling sex
Aluminum is highly recyclable and the properties of recycled aluminum are almost indistinguishable from those of primary aluminum.
| Temper | T3-T8 | |||||||||||
| Grade | 1000series：1050/1060/1070/1080/1100/1350 | |||||||||||
| 2000series：2011/2014/2017/2024 | ||||||||||||
| 3000series：3002/3003/3104/3204/3030 | ||||||||||||
| 5000series：5005/5025/5052/5040/5054/5056/5083/5152 | ||||||||||||
| 6000series：6101/6003/6061/6063/6020/6201/6262/6082 | ||||||||||||
| 7000series：7003/7005/7050/7075 | ||||||||||||
| 8000series：8011 | ||||||||||||
| Thickness | 0.4-20mm or customize | |||||||||||
| Width | Customize | |||||||||||
| Length | 1m,2m,3m or customize length | |||||||||||
| Service | Perforated, Cutting special size, Doing flatness, Surface treatment,etc | |||||||||||
| Executive Standard | GB/DIN/ANSI/BS/JIS/ASTM/BS | |||||||||||
| Certificate | SGS/BV/MTC/IOS/CE | |||||||||||
| Delivery time | 7-15 days after deposit | |||||||||||
| Packaging Details | Protection film and hot shrink plastic film / EPE foam packing / brown paper packing / wooden packing / Metal pallet or depend onclients special requirement. | |||||||||||
Corrosion resistance
Aluminum profiles have a density of only 2.7g/cm3, about one-third that of steel, copper, or brass (7.83g/ cm3 and 8.93g/ cm3, respectively). Aluminum exhibits excellent corrosion resistance in most environmental conditions, including air, water (or brine), petrochemical, and many chemical systems.
Electrical conductivity
Aluminum profiles are often chosen because of their excellent electrical conductivity. The electrical conductivity of aluminum is nearly half that of copper, weight equal.
Thermal conductivity rate
The thermal conductivity of aluminium alloys is about 50-60% of that of copper, which is good for heat exchangers, evaporators, heating appliances, cooking utensils, as well as cylinder heads and radiators for cars.
The ferromagnetic
Aluminum profiles are non-ferromagnetic, an important characteristic for the electrical and electronic industries. Aluminum profiles are non-flammable, which is important for applications involving handling or contact with flammable and explosive materials.
machinability
The machinability of aluminum profiles is excellent. The machining characteristics of various deformed and cast aluminum alloys, as well as the various states in which these alloys are produced, vary considerably, requiring special machine tools or techniques.
formability
Specific tensile strength, yield strength, ductility, and corresponding rate of work hardening govern the variation of allowable deformation.
Recycling sex
Aluminum is highly recyclable and the properties of recycled aluminum are almost indistinguishable from those of primary aluminum.
| Temper | T3-T8 |
| Grade | 1000series：1050/1060/1070/1080/1100/1350 |
| 2000series：2011/2014/2017/2024 | |
| 3000series：3002/3003/3104/3204/3030 | |
| 5000series：5005/5025/5052/5040/5054/5056/5083/5152 | |
| 6000series：6101/6003/6061/6063/6020/6201/6262/6082 | |
| 7000series：7003/7005/7050/7075 | |
| 8000series：8011 | |
| Thickness | 0.4-20mm or customize |
| Width | Customize |
| Length | 1m,2m,3m or customize length |
| Service | Perforated, Cutting special size, Doing flatness, Surface treatment,etc |
| Executive Standard | GB/DIN/ANSI/BS/JIS/ASTM/BS |
| Certificate | SGS/BV/MTC/IOS/CE |
| Delivery time | 7-15 days after deposit |
| Packaging Details | Protection film and hot shrink plastic film / EPE foam packing / brown paper packing / wooden packing / Metal pallet or depend onclients special requirement. |
| Product | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | V | Ti | Other | |
| Single | Total | |||||||||||
| 6061 | 0.4-0.8 | 0.7 | 0.2 | 0.15 | 0.8-1.2 | 0.04-0.35 | / | 0.25 | / | 0.15 | 0.05 | 0.15 |
| 6063 | 0.2-0.6 | 0.35 | 0.1 | 0.15 | 0.6-0.9 | 0.05 | / | 0.15 | / | 0.1 | 0.05 | 0.15 |
| 6082 | 0.7-1.3 | 0.5 | 0.1 | 0.4-1.0 | 0.6-1.2 | 0.25 | 0.1 | 0.1 | / | 0.2 | 0.05 | 0.15 |
